Quick Fix- Shark Steam Mop Not Heating Up And Not Blowing Steam
Last Updated on October 15, 2023 by admin
The best steam mops generally have a longer life, can produce more steam, and improve the cleaning result compared to other mops. They also cost less than expensive handheld vacuums or other leading vacuum cleaners. Whether you have vinyl flooring, linoleum floors, or ceramic or porcelain tiles, a steam mop is an effective appliance to clear the dust and debris and sanitize your floors.
Shark steam mop
Shark is one of the most reliable, frequently bought steam mops. In addition to its excellent quality and affordability, it has a powerful motor that produces more powerful steam, which helps in removing dirt and stains from hard-to-clean areas of your floors.
Problems faced by Shark steam mop users
However, like other electrical appliances, the Shark steam mop also sometimes stops working and creates problems for us. One of the problems with Shark steam mop experienced by many users is the steaming problem. If it is not cared for and cleaned regularly, the time will come when it will not heat up and will stop making steam.
How to fix the steaming problem?
If you are also facing the steaming problem on your Shark steam mop, read this article and find the best and easiest ways to fix this issue.
So, let’s have a look at some quick fixes to solve the problem.
Check the water in the steam mop.
First, check and ensure that the steam mop is filled with the required water as per the manufacturer’s recommendations. If the steam mop does not have enough water, it will not blow up the steam. After you fill it with water, it will start heating up and making steam within 30 to 40 seconds.
Turn on steam and spray settings.
You may have activated the spray-only option on your Shark steam mop, where the steam mop does not use steam and only spray when used on the surfaces, so check the settings of the steam mop and turn on the steam and spray option to fix the issue.
Check the Water intake tube.
If your Shark steam mop is still not blowing steam, you can check if the water intake tube is not bent, as it will block the way to steam. Straighten it out so it can reach the steam tank bottom.
Clean the nozzle
If all the above methods fail to fix the issue, then the problem might occur because of the blocked nozzle. This method is a bit complicated compared to other methods, but you can still fix it by yourself.
If you are using tap water in your Shark steam mop, it contains calcium, magnesium, and other minerals, which create a blockage in the nozzle, resulting in less steam discharge pressure. Gradually, these minerals buildup increases on the nozzle and stops the steam mop from blowing steam.
It is recommended to use distilled water to avoid blockage of the nozzle or clean the nozzle every day by scrubbing it with a toothbrush.
If the steam nozzle is already blocked, apply this method to clear up the buildup on the nozzle.
- First, empty the water tank of the Shark steam mop. Make sure that the steam mop is turned off and not hot.
- Take out the nozzle cleaner that comes with the Shark steam mop or straightened paper clip and move it back and forth on the tip of the nozzle to clean the calcium buildup.
- Now grab a cotton swab and dip it into white vinegar. Rub the cotton swab on the steam head to clean it up.
Check if the steam mop is blowing steam or not. If it is blowing steam, the problem is resolved. If it still has a problem, try this way.
- Mix an equal amount of vinegar and distilled water and fill the water tank with this solution. Leave it for one day.
- After one day, turn your steam mop to the highest setting and turn it on.
- If it makes some noise after reaching a certain temperature, the calcium buildup is removed successfully.
- Remove the solution from the water tank and fill it with distilled water.
It will successfully resolve the problem.
Alternatively, the commercial cleaner can be used the same way to remove calcium buildup on the nozzle or to open any steam mop blockage.
Leakage problem
The problem might occur because the leakage problem does not allow the steam mop to build pressure for blowing steam. If you found any leakage on your steam mop, contact shark customer services and claim your one-year warranty if you have bought it new.
How to prevent blockages in a Shark steam mop?
You can prevent blockages or any problem with the steam mop by following these extra measures.
- The manufacturer always recommends distilled water to use in the steam mop.
- Clean the steam once a week if you are using it regularly.
- Vacuuming your place before steam mopping can also help to prevent blockages in the steam mop.
- It is good not to use it on carpets.
Final thoughts
Prevention is better than cure. However, we have discussed many ways to fix the Shark steam, not blowing steam issue. To avoid these problems, take extra care of your steam mop.
