How To Clean Drywall Dust Off Laminate Floors?

Clean Drywall Dust Off Laminate Floors

Last Updated on October 15, 2023 by admin

Removing drywall dust from laminate floors can be a tedious task. The fine powdery particles can settle deep into the cracks of your flooring and be challenging to remove. With a few simple steps you can take to make sure your laminate floors stay clean and free of dust.

When To Clean Drywall Dust Off?

It is important to clean drywall dust off laminate floors as soon as possible after it accumulates. The longer drywall dust stays on the floor, the harder it will be to remove and the more likely it is to scratch or otherwise damages the floor. It is also important not to spread the drywall dust around when cleaning, as this will only worsen the problem.

Things Required For Cleaning

  • Soft Brush
  • Dustpan
  • Shop-Vac
  • Microfiber Mop
  • Face mask
  • Broom

    Things Required For Cleaning
    Things needed for cleaning

How To Clean Drywall Dust Off Laminate Floors?

You can easily clean the drywall dust off from laminate flooring by following these steps:

Start with Sweeping
Broom and dustpan

Start with Sweeping: Start by sweeping the drywall dust off the laminate floors using a broom and dustpan. Make sure to get into all the corners and crevices so you don’t leave any residue behind.

Use a Strong & Reliable Shop-Vacuum
Strong & Reliable Shop-Vacuum

Use a Strong & Reliable Shop-Vac: Once the sweeping is done, you can use a shop-vac to suck up any remaining dust particles. Vacuum along edges and corners to ensure complete removal of all drywall dust.

Lightly Dampened Mop Time
mop

Lightly Dampened Mop Time: To finish up, you can use a lightly dampened mop to get any dust the shop vac may have missed. Make sure to move in a circular motion and rinse off the mop after each pass to ensure the complete removal of all dirt particles from your floors.

Different Ways Of Cleaning Drywall Dust

Use Water and Vinegar Solution
Water and vinegar

Use Water and Vinegar Solution: One of the easiest and most reliable ways of cleaning drywall dust off laminate floors is to make a solution of water and white vinegar. Mix one part vinegar and four parts of water in a bucket or spray bottle. Spray the mixture onto the affected areas, ensuring you cover as much as possible. Once applied, use a microfiber cloth to scrub the area gently. This should eliminate any dust left on the surface and leave your laminate floors looking as good as new.

Use Ammonia Solution
Ammonia Solution

Use Ammonia Solution: Alternatively, you can make an ammonia solution by mixing one and four parts of water in a bucket or spray bottle. Again, cover the affected area with the solution and use a microfiber cloth to scrub it off. Ammonia is particularly effective at removing dried drywall dust from laminate floors, so this method may be the best to use if you’re dealing with a particularly stubborn patch of dust.

Use Baking Soda and Water Solution
Baking Soda and Water

Use Baking Soda and Water Solution: If you’re looking for a more straightforward and natural way of cleaning drywall dust off laminate floors, you can try a baking soda and water solution. Mix one part baking soda to four parts water in a bucket or spray bottle, cover the affected area with the mixture, and use a microfiber cloth to scrub it away.

Use Alcohol Solution
Alcohol Solution

Use Alcohol Solution: For extra stubborn patches of drywall dust, an alcohol solution can break it down and make it easier to remove. Mix one part rubbing alcohol with four parts water in a bucket or spray bottle, cover the affected area with the mixture, and use a microfiber cloth to scrub it off. Wear gloves when using this solution, as the alcohol can be harsh on your skin.

Water and Dish Detergent Solution
Water and Dish Detergent Solution

Water and Dish Detergent Solution: You can try using a water and dish detergent solution to eliminate drywall dust. Mix one dish of detergent with four parts water in a bucket or spray bottle, cover the affected area with the mixture, and use a microfiber cloth to scrub it off. This method should break down any stubborn dust left and make removing it easier.

Use the solution of dilute vinegar & water
Water and vinegar

Use Water and Vinegar Directly: If you don’t have a spray bottle or bucket, use a damp towel and mix one vinegar with four parts water. Then, apply the mixture to the affected areas and scrub with a microfiber cloth. This should get rid of any drywall dust left on your laminate floors.

Remove the cleaning solutions: Remove with a damp cloth after scrubbing and vacuum up any remaining dust. This will help ensure that your laminate floors remain clean and free of drywall dust. If you’re still having trouble getting rid of dried-on drywall dust, it may be advisable to call a professional cleaner to get the job done. Cleaning drywall dust from laminate floors is tricky, so it’s always best to leave it to the experts. This will make sure your floors are properly cleaned and free of dust.

Use Dry Cleaning Solvent: If you’re still struggling to remove the drywall dust, try using a dry cleaning solvent. Use gloves when handling this solution, as it can be harsh on your skin. Apply the solvent directly onto the affected areas and use a microfiber cloth to scrub it off.

What Not To Do When Cleaning?

Using a Beater Brush
Beater Brush

Using a Beater Brush: Using a beater brush on laminate floors can cause severe damage, as the stiff bristles scratch and scuff the surface.

Adding Soap to Cleaning Solutions
Cleaning soap

Adding Soap to Cleaning Solutions: Soap and water can be used together for laminate floor cleaning, but too much soap will leave a residue that may cause the floors to become tacky or discolored.

Adding Soap to Cleaning Solutions

Using Steam Cleaners: Steam cleaners can be tempting for cleaning drywall dust, but they use too much heat and moisture for laminate floors. The excessive water combined with the heat causes the laminate to warp or swell.

Using Cleaning Solutions: While some cleaning solutions are safe, too much can damage the laminate and leave a residue. Using only a small cleaning solution with plenty of water is best.

Using Cleaning Solutions

Using Commercial Floor Cleaners: Commercial floor cleaners are often too harsh for laminate floors and can cause discoloration or damage. It is best to stick with a mild soap solution, water, and a microfiber mop.

Using Commercial Floor Cleaners

Using Murphy Oil Soap: Murphy oil soap is a popular choice for cleaning laminate floors, but it can leave an unwelcome residue. To be safe, use only a tiny amount of the product with plenty of water. It’s also essential to ensure that all the soap is rinsed away after cleaning.

FAQs

Can I mop up drywall dust?

No, it is not recommended to mop up drywall dust. The best way to clean up drywall dust off laminate floors is to sweep or vacuum the dust away before mopping with a damp mop and mild cleaning solution.

Is drywall dust toxic?

Drywall dust is not considered toxic but can pose health risks if inhaled or ingested. Using a dust mask to clean drywall dust and avoid breathing in the particles is best. Additionally, it should be kept from food and drinks and washed off hands thoroughly after contact with the dust.

Can I use 409 on laminate floors?

No, 409 or any all-purpose cleaners on laminate floors are not recommended. Instead, use a mild cleanser like white vinegar and water. Avoid using harsh chemicals as they may damage the floor’s finish.

What is floor cleaner safe for vinyl plank flooring?

Using a mild cleanser like white vinegar and water on vinyl plank flooring.

Conclusion

Cleaning drywall dust off laminate floors can be a difficult task. However, proper techniques and tools can make this process much more manageable. Vacuuming, using a wet mop, and wiping the floor with a damp cloth are all effective methods for removing drywall dust. These techniques can help you keep your laminate flooring looking new for many years.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *